quantum Installation of ATA HDD free download

File name Installation of Quantum ATA HDD.PDF

QUANTUM CORPORATION Installation of Your Quantum ATA Hard Disk Drive For PC Compatible Systems Running DOS/Windows v1.70 QUANTUM CORPORATION Tools Required Before beginning the installation you will need: (1) A formatted, bootable floppy diskette. Note: If you are unable to boot from this bootable floppy diskette, your system CMOS (BIOS) floppy-boot-sequence setting may require a change (from C, A to A, C) in order for your computer to boot to the A:\ prompt. If you intend to use your CDROM to install your operating system once your hard drive is installed, you may wish to add the required CDROM driver and a CONFIG.SYS file to this floppy disk before beginning the installation. This is true for DOS or Windows 95. The bootable Windows 98 Startup Disk already provides this CDROM Support. (2) If you are installing your hard drive on a system that is several years old, you may require one additional tool, a copy of the Ontrack Disk Manager software utility. This program may be downloaded free of charge from Quantum's Web Site at http://www.quantum.com. The Ontrack Disk Manager software need only be used on older systems lacking sufficient BIOS support for large capacity ATA hard drives. These older systems will require an "alternative" installation procedure, which is described below. Types Of Installation